People

Thermal engineering and Laser applications lab

Alumni

Total 15건 1 페이지
  • Lab. Manager​

    김학개 Hakgae Kim

    • Workplace

      Amkor Technology Korea, Technology Research Center

    B.S
    B.S. in Mechanical Engineering: Chung-Ang University
    M.S / M.E / Master course
    Master course: Chung-Ang University, Department of Intelligent Energy and Industry
    Research field
    Heat transfer simulation, Laser micromachining
    Conference
    Conference

    (Oral) Pool Boiling Performance on SiC Surfaces Processed by Laser

    (Poster) Thermal Diffusivity Measurement of Metal Microwires using Transient Electrothermal Technique

    (Poster) Laser-fabricated microchannel heat sinks on SiC for direct liq

    Journal Paper
    Journal Paper

    1st author – Applied Surface Science, 2024

    Coauthor – 5 papers

  • Lab. Manager​

    리즈완 칸 Rizwan Khan

    • Workplace

      Research Professor, Pusan University

    B.S
    B.S. in Chemistry: University of Malakand, Pakistan
    M.S / M.E / Master course
    M.Phil in Chemistry: University of Malakand, Pakistan
    Ph.D
    Ph.D. in Applied Chemistry: Okayama University, Japan
    Research field
    Functionalization of 2D materials for energy storage applications
    Conference
    Conference

    (Poster) Preparation of nitrogen-doped laser-induced graphene for micro-supercapacitor applications

    Journal Paper
    Journal Paper

    1st author – Fabrication of functional laser-induced graphene using gelatin-2,6-diaminoanthraquinone coating for high-performance micro-supercapacitor, Journal of Power Sources

    1st co-author – Fabrication of modified laser-induced graphene using activated carbon and polyamic acid coating for flexible and high-performance microsupercapacitors, Carbon, 230, 119646, 2024

    1st author – Sources, 621, 235305, 2024

    Coauthor – 1 paper

  • Lab. Manager​

    안 판 응우옌 Anh Phan Nguyen

    B.S
    B.E. in Physics, University of New Orleans (New Orleans, LA, USA)
    M.S / M.E / Master course
    M.E. in Intelligent Energy and Industry, Chung-Ang University (Seoul, Korea)
    Research field
    Laser-induced graphene
    Conference
    Conference

    (Poster) High-Performance Washable PM2.5 Filter Fabricated with Laser-Induced Graphene, KSME 2021 fall conference, Gwangju, South Korea, November 5, 2021

    Journal Paper
    Journal Paper

    1st author – High-Performance Washable PM2.5 Filter Fabricated with Laser-Induced Graphene, Materials, 14(19), 5551, 2021

    1st author – Fabrication of Co- and P-Doped Laser-Induced Graphene for Use in Water Splitting Applications, ACS Applied Energy Materials, 7, 9, 3750–3760, 2024

    Coauthor – 4 papers

  • Lab. Manager​

    짠 반 자우 Tran Van Chau

    • Workplace

      Senior Researcher, Advanced Technology Center, Le Quy Don Technical University, Vietnam

    B.S
    B.E. in Mechanical Engineering, Hanoi University of Science and Technology (Hanoi, Vietnam)
    M.S / M.E / Master course
    M.E. in Mechanical Engineering, Hanoi University of Science and Technology (Hanoi, Vietnam)
    Ph.D
    Ph.D. in Mechanical Engineering, Chung-Ang University (Seoul, Korea)
    Research field
    3D printing
    Conference
    Conference

    (Presentation) Self-Propagating Reduction of Graphene Oxide Film, KSME 2021 fall conference, Gwangju, South Korea, November 5, 2021

    (Poster) Self-Propagating Reduction of Graphene Oxide Film for Supercapacitor Applications, KSME TED 2022 spring c

    Journal Paper
    Journal Paper

    1st author – Controllable self-propagating reduction of graphene oxide films for energy-efficient fabrication

    1st co-author – Laser-directed energy deposition to achieve high-aspect-ratio micropillar arrays for 3D interdigitated micro-supercapacitors

    1st author (conference paper) – Simultaneous Self-propagating Reduction and Cobalt Oxide Incorporation in Graphene Oxide Films for Supercapacitor Applications

    Coauthor – 10 papers

  • Lab. Manager​

    마니 프라부 S.S Mani Prabu

    • Workplace

      Assistant Professor, SSN College of Engineering, Shiv Nadar University Group, Chennai, Tamilnadu

    B.S
    B.E. in Mechanical Engineering: Anna University, Tamilnadu, India
    M.S / M.E / Master course
    M.E. in Manufacturing Engineering: Anna University, Tamilnadu, India
    Ph.D
    Ph.D. in Metallurgy Engineering and Materials Science, IIT Indore, Madhya Pradesh, India
    Research field
    Manufacturing and metallurgy of nitinol shape memory alloys – additive manufacturing, welding, thin-film deposition
    Journal Paper
    Journal Paper

    1st co-author – Improving the actuation behavior of nitinol shape memory alloys by nanosecond laser surface texturing


  • Lab. Manager​

    라빈드라 나투지 블라케 Ravindra Nathuji Bulakhe

    • Workplace

      Research Professor, Sungkyunkwan University

    B.S
    B.S. in Physics: Department of Physics, Savitribai Phule Pune University, Pune, India
    M.S / M.E / Master course
    M.S. in Physics: Department of Physics, Savitribai Phule Pune University, Pune, India
    Ph.D
    Ph.D. in Physics: Department of Physics, Shivaji University, Kolhapur, India
    Research field
    Development of nanomaterials of metal oxides, metal sulfides, and carbon materials, and their composites for energy storage devices (supercapacitors and Li-ion batteries)
    Conference
    Conference

    (Presentation) Chemically Synthesized Nano-hybrid Materials for High-Performance Hybrid Supercapacitor Applications, AMSCA MAVERICK 2022, SPPU Pune, India, November 18–20, 2022

    Journal Paper
    Journal Paper

    1st author – Mesoporous nanohybrids of 2D layered Cu–Cr phosphate and rGO for high-performance asymmetric hybrid supercapacitors

    1st author – Chemically synthesized mesoporous nickel cobaltite electrodes of different morphologies for high-performance asymmetric supercapacitors

    1st author – Chemical route to the synthesis of novel ternary CuCr2S4 cathodes for asymmetric supercapacitors

  • Lab. Manager​

    이정배 Lee Jungbae

    • Workplace

      삼성전자 DS 반도체연구소

    B.S
    B.S. in Mechanical Engineering: Chung-Ang University
    M.S / M.E / Master course
    Master course: Chung-Ang University, Mechanical Engineering
    Research field
    Laser-induced graphene, Diamond CVD
    Conference
    Conference

    (Poster) Fabrication of Densified Laser-Induced Graphene Micro-supercapacitors, KSMTE 2020 Fall Conference, Jeju, South Korea, December 4, 2020

    (Presentation) 올-레이저 공정을 이용한 빠르고 간단한 마이크로 히트싱크 제작, KSME TED 2022 Spring Conference, Gyeongju, South Ko

    Journal Paper
    Journal Paper

    1st author – Densified Laser-Induced Graphene for Flexible Micro-supercapacitors, Energies, 13 (24), 6567, 2020

    Coauthor – 7건

    Patent
    출원 – 1건
  • Lab. Manager​

    주호유 Hao Yu Zhou

    • Workplace

      Intel Semiconductor Storage Technology (Dalian) Ltd.

    B.S
    Bachelor of Mechanical Engineering: LUDONG University (2015–2017), University of ULSAN (2018–2019)
    M.S / M.E / Master course
    Master course: Chung-Ang University, Department of Intelligent Energy and Industry (CAYSS scholarship, full-tuition waiver)
    Research field
    Laser cutting and drilling
    Conference
    Conference

    (Poster) Heat Scanning for the Fabrication of Conductive Fibers, KSME 2021 Spring Conference, Jeju, South Korea, May 28, 2021

    (Poster) Laser-assisted fabrication of micro-channels for the application in boiling heat transfer, KSME 2021 Fall Confe

    Journal Paper
    Journal Paper

    1st author – All laser-based fabrication of microchannel heat sink, Materials and Design, 211, 110968, 2022

    Coauthor – 2건

  • Lab. Manager​

    마히마 칸델왈 Mahima Khandelwal

    • Workplace

      Research Professor, Korea University

    B.S
    B.S. in Chemistry: University of Delhi, India (2005–2008)
    M.S / M.E / Master course
    M.S. in Chemistry: Department of Chemistry, University of Delhi, India (2008–2010)
    Ph.D
    Ph.D. in Chemistry: IIT Roorkee (2010–2016)
    Research field
    Carbon-based materials and their functionalization for energy storage and conversion applications
    Journal Paper
    Journal Paper

    1st author – Simple fabrication of Co3O4 nanoparticles on N-doped laser-induced graphene for high-performance supercapacitors, RSC Advances, 61, 38547–38554, 2021

    1st author – Nitrogen and Boron Co-doped Densified Laser-induced Graphene for Supercapacitor Applications, Chemical Engineering Journal, 428, 131119, 2022

    1st author – Nitrogen and phosphorous Co-Doped Laser-Induced Graphene: A High-Performance electrode material for supercapacitor applications, Applied Surface Science, 576, 151714, 2022

    Coauthor – 1건


  • Lab. Manager​

    장진아 Jina Jang

    • Workplace

      SK이노베이션 기술혁신연구원

    B.S
    Bachelor of Mechanical Engineering: Chung-Ang University
    M.S / M.E / Master course
    Master course: Chung-Ang University, Mechanical Engineering
    Journal Paper
    Journal Paper

    1st author - Laser Pyrolysis of Imprinted Furan Pattern for the Precise Fabrication of Micro-supercapacitor Electrodes, Micromachines, 2020, 11, 746

    1st author - Heat Scanning for the Fabrication of Conductive Fibers, Polymers, 13(9), 1405, 2021

    Coauthor - 3건


    Patent
    등록 - 2건 (히터 열공정을 이용한 웨어러블 디바이스용 도전사 제조, 유연성과 높은 축전용량을 갖는 고종횡비 슈퍼커패시터 전극 및 그 제조방법)
  • Lab. Manager​

    웽 티 프엉 Phuong Thi Nguyen

    • Workplace

      Battery Researcher, Viettel Corporation (Hanoi, Vietnam)

    B.S
    Bachelor of Science - Physics and Education: Hanoi National University of Education (Hanoi, Vietnam)
    M.S / M.E / Master course
    Master course: Chung-Ang University, Mechanical Engineering (CAYSS scholarship, full-tuition waiver)
    Research field
    Fiber-type supercapacitors
    Conference
    Conference

    (Poster) Pulsed Laser Thermal Growth of Periodic Silicon Nanowire Arrays, KSME 2019 fall conference, Jeju, South Korea, November 13, 2019

    Journal Paper
    Journal Paper

    1st author - Nanosecond laser-induced reshaping of periodic silicon nanostructures, Current Applied Physics, 22, 43-49, 2021

    1st author - Laser-Assisted Fabrication of Flexible Monofilament Fiber Supercapacitor, Journal of Materials Chemistry A, 2021

    Coauthor - 2건

    Patent
    등록 - 1건 (섬유형 슈퍼커패시터 및 그 제조 방법)
  • Lab. Manager​

    김경연 Kim Kyung Yeun

    • Workplace

      Seoul National University, Mechanical Engineering, MS & Ph.D combined candidate

    B.S
    Bachelor in Mechanical Engineering: Chung-Ang University (Seoul, South Korea)
    Ph.D
    MS & Ph.D combined course
    Conference
    Conference

    (구두발표) (1)

    연구분야: 탄화된 폴리이미드 전극 제조

    Journal Paper
    Journal Paper

    1st author - Simultaneous densification and nitrogen doping of laser-induced graphene by duplicated pyrolysis for supercapacitor applications, Journal of Power Sources, 441, 227199, 2019

    Coauthor - 2건


    Patent
    등록 - 2건 (치밀화된 레이저 유도 그래핀의 제조방법, 레이저 유도 그래핀 타입 에어 필터 및 이의 제조방법)
  • Lab. Manager​

    최 하예린 Choi Ha Ye Lin

    • Workplace

      LG화학 기술연구원

    B.S
    Bachelor in Mechanical Engineering: Chung-Ang University (Seoul, South Korea)
    M.S / M.E / Master course
    Master in Mechanical Engineering: Chung-Ang University, Mechanical Engineering (GRS scholarship, full-tuition waiver)
    Research field
    Electrochemical capacitors, Carbon nanomaterials
    Conference
    Conference

    (구두발표)

    (1) Fabrication of flexible graphene electrodes using laser photothermal processing, KSMTE 2018 fall conference, Seoul, South Korea, October 5, 2018

    (2) 레이저 열공정을 통한 슈퍼커패시터용 그래핀 전극 용접 및 활성화, KSME 2019 Spring Conference of Thermal Engi

    Journal Paper
    Journal Paper

    1st author - Laser transmission welding and surface modification of graphene film for flexible supercapacitor applications, Applied Surface Science, Volume 483, 31 July 2019


    1st author - Micro-patterned metal current collector for high aspect ratio flexible graphene supercapacitors, Applied Surface Science, 2020


    Coauthor - 2건

    Patent
    등록 - 4건 (치밀화된 레이저 유도 그래핀의 제조방법, 섬유형 슈퍼커패시터 및 그 제조 방법, 레이저를 이용한 3차원 금속 프린팅 장치 및 방법, 히터 열공정을 이용한 웨어러블 디바이스용 도전사 제조)
  • Lab. Manager​

    체 휴 끄엉 Che Huu Cuong

    B.S
    Bachelor of Mechanical Engineering: Bach Khoa University (Ho Chi Minh University of Technology, Vietnam)
    M.S / M.E / Master course
    Master course: Chung-Ang University, Mechanical Engineering (CAYSS scholarship, full-tuition waiver)
    Research field
    Twisted string actuation
    Journal Paper
    Journal Paper

    Coauthor - Highly Durable Bidirectional Joint with Twisted String Actuators and Variable Radius Pulley, IEEE/ASME Transactions on Mechatronics, 1083-4435 (c), 2019

    Patent
    등록 - 1건 (스트링 꼬임 유닛 및 이를 포함하는 스트링 꼬임 구동기)
  • Lab. Manager​

    슈안쩡 짠 Tran Xuan Tung

    M.S / M.E / Master course
    2018.08 Master in Mechanical Engineering, Chung-Ang University
    Research field
    Laser thermal reduction of graphene oxide, Supercapacitors, Nanostructures
    Conference
    Conference

    (Conference presentation) Laser Thermal Reduction of Graphene Oxide Paper for the Fabrication of Supercapacitors, KSME 2018 Spring Conference of Thermal Engineering, Jeju, South Korea, April 26, 2018

    Journal Paper
    Journal Paper

    Laser-Induced Reduction of Graphene Oxide by Intensity-Modulated Line Beam for Supercapacitor Applications, ACS Applied Materials & Interfaces, 10 (46), 39777-39784, 2018.


    Effect of Enhanced Thermal Stability of Alumina Support Layer on Growth of Vertically Aligned Single-Walled Carbon Nanotubes and their Application in Nanofiltration Membranes, Nanoscale Research Letters, 13 (1), 173, 2018.

검색